Pink coolant dex cool12/5/2023 But Honda has an extended life OAT coolant that is dyed dark green. I'd recommend adding to the bottom chamber to bring that up to the cold fill line. Volkswagen/Audi uses a similar product that is dyed pink. For the bottom fill line, look closely at the inward facing side - maybe get a flashlight and it will be obvious. Just top off the bottom reservoir through the tiny fill cap next to the upper tank with 50/50 DEXCOOL mix and you'll be good to go.īoth the top and the bottom chambers have a cold fill line. Prestones Antifreeze+Coolants are designed to the highest standards using state of the art technology. Zerex Dex-Cool Antifreeze/Coolant is proven to maximize engine life in passenger cars and light trucks, and is approved for use in GM, Ford, Chrysler and SAAB. G-05 is HOAT they will not mix w/o causing a. Prestone DEX-COOL antifreeze+coolant - Ready To Use (50/50 Prediluted) is specially designed to work with All GM vehicles 1995 and newer (GM approved), most Ford vehicles 2011 - 2018 and most Chrysler vehicles 2013 and newer. Mixing G-05 with OAT is a formula for disaster. The OPs cooling system calls for OAT coolant. I am 99.44 sure it is fully compatible with the original pink coolant. And yeah, it's not uncommon for these cars to evaporate a bit of coolant off as it's used. Zerex G-05 by Valvoline is a HOAT that I use in my Mopar built VW Routan. The top chamber should be completely full and you'll want to keep the bottom chamber roughly half full (can use the indentation on the rear side of the tank that the arrow is pointing at in the picture as a reference). I'm not aware of any cold fill line on the top chamber. Is this normal? I've read some places that the bottom chamber should be half full, but reading the manual multiple times it seems like maybe I don't worry about the lower chamber unless the top chamber isn't full? The instructions given to add coolant look like they are for either if the coolant is visible but not at or above the COLD FILL line, or if there is no coolant is visible in the coolant surge tank. The bottom chamber has very little in it, maybe 3/4", and I don't see any fill line. So with the engine cold, the top chamber is filled just about to the top, above the COLD FILL line. If coolant is visible but the coolant level is not at or above the COLD FILL line, add a 50/50 mixture of clean drinkable water and DEX-COOL coolant.' According to the manual 'Check to see if coolant is visible in the coolant surge tank. DEX-COOL Extended Life Antifreeze/Coolant Pentofrost SF Extended Life Antifreeze/Coolant Pentofrost NF Antifreeze/Coolant Part Number (Concentrate/Pre-Mix) AFZ GAL AFZ GAL50/1 AFZ AF2000 AFZ AF2100 AFZ PEAKLL AFZ PEAK50/50LL AFZ ORDEX AFZ ORDEX50/50 AFZ LONGLIFE PNT PF-SF-1.5L PNT PF-NF-1.5L Antifreeze Color Green. Sorry to drag up an old thread, but want to make sure I understand this.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |